STANDARD 14 SPARE INPUTS AND 12 SPARE OUTPUTS FOR INTERFACING WITH OTHER ANCILLARY EQUIPMENT. EXTENSION UP TO 30 I/O ALSO AVAILABLE.

PARTS REMOVAL:

1. 3 axes synchronized movements reduce complexity and cost to build end-arm-tooling.
2. Able to reach parts with hooks and undercuts using unconventional paths such as curves, etc..

STACK AND ARRAY:

Each cycle can handle up to 9 stack areas with individual stack formats. Can also place parts onto 100 points on the same surface.

INSERT AND GRID:

Each cycle can place 9 different insertion materials into the mould,fed from a single point, grid pallet, or multi-station.

3D PATH:

The robot can follow teaching point-to-point path to move. It lets the track move smoothly and shorten the cycle time.

INSPECTION:

1. Reject program: Detects signal from the moulding machine, set the reject part count and places part in different area.
2. Inspection program: Places part in different area for QC inspection, for example every 100 cycles.　
3. Test-mould program: Allows checking of parts at the beginning of each automatic moulding cycle before cycle counter starts.
4. Weight program: Checks part quality from electronic weigh scale and separates defect parts.
5. Cycle counter: Counts the total number of moulding cycles. If counting good parts only, inspection cycle anddefect parts are not included in count total.